The TX Series 24 inch L.C. Series of Industrial Pneumatic Lift trucks were engineered and designed with emphasis on service and operator personnel at the forefront. The TX Series offers standard features like for example more leg room and head room, tilt steering wheel, shock mounted center mounted operator station, CANbus technology for increased leg and head room and operator comfort and convenience, in addition to fingertip electric joystick controls. The TX Series is available in 5 various wheel bases, so there is certainly a particular unit right for your particular application.
All of the controls have integrated solid state controllers utilizing J1939 CANbus technology. This set up enables controllers and sensors the ability to communicate with less wiring between the parts. For instance, I/O modules are great to add consistency to the control system of the machine and used to reduce electromechanical relay devices.
Situated in each cab is the main color display which access the information from the J1939 CANbus technology. This display shows spreader status lights, engine data along with warnings and machine and man interface data. The equipment functions are capable of being tuned through the main display in the cab. As well, the display allows service personnel to access information required while troubleshooting. Like for instance, information such as controller outputs and sensor status. So as to prevent operator access, the tuning functions are protected by a password.
The TX Series lift trucks have all been equipped with an electronic turbocharged Tier Certified Cummins, that is an after cooled or charge air to air diesel engine. Some of the standard engine features consist of maintenance monitor, electronic diagnostic monitor, transmission/engine protection systems, water/fuel separator, reduced emissions and improved fuel economy.
The transmission on all TX Series are 3-speed, modulated powershift, fully reversing transmissions. The electric roll shift control and the inching powershift transmission as well as a separate air-to-oil cooler. All of these features make an effective and strong machine that is highly dependable on the jobsite.
|
|
