Forklifts are vehicles normally found in factories, warehouses and other work locations where it is necessary to move heavy materials from one location to another. The mast is the mechanism located on the front of the forklift that hydraulically lifts and lowers the load. The "cat" is the area that is protected where the driver of the forklift sits.
Forklifts can lift loads that weigh between one to five tons. Various kinds can be utilized to lift shipping containers and much heavier loads.
The tires of a forklift must be checked and maintained frequently. The kinds of tires on various forklifts differ based on factors like for instance weight of the loads, ground surfaces and frequency of use. Each and every driver of a forklift must have access to replacement tires, a forklift jack and tire press.
Tire Maintenance Instructions
Perform tire inspections on a regular basis. Watch for indications of damage and wear to the tires. If the wear on the tire exceeds 40%, it should be replaced.
When you buy tires, be sure you purchase the right type - pneumatic, polyurethane or solid.
When you have to replace the tires, the forklift jack must be positioned under the tire. You can easily change the tires if you lift the forklift high enough.
To remove the damaged tire, pull the tire from the rim using the tire press. Install the new tire and secure it well. If you are changing more than one tire and you have just one jack, lower the forklift, then reposition the jack at the next tire.
A repair company could provide on-site tire repair. If the tire is too big for both in-house and mobile tire presses, the damaged tire should be transported to a shop which has a stationary tire press.