Compared to a sit-down model, the stand-up forklift unit is totally different to utilize. The way wherein you lift loads and your movements are completely different. If you do not have correct training for using a stand-up unit, you could probably cause harm co-employees or to yourself. When using a stand-up model, you should follow the correct safety rules. There are a few basic operating standards that should be met when utilizing a stand-up unit.
When beginning, stand up on the lift truck so as to get a feel for the controls and the steering knob. The steering is handled using the knob steering plate rather than a steering wheel. Take note that this knob moves exceptionally fast, hence, you must be accustomed to moving it carefully so as to be certain not to over steer. The horn is located on the control handle, like with the control for backwards, forwards and the fork movement. The floor pedal allows the forklift power to move.
When you are ready to begin, turn the key to start the forklift. Be sure that your forks are retracted. If you are moving all-around the floor, the forks must be pointed a little upwards. Never drive with the forks in their extended position. If you are traveling forwards, move the control handle forward and step on the pedal in order to make the lift move forward. If you are backing up, be sure to beep your horn in order to alert those around you. Look behind you prior to stepping on the pedal so as to make sure the way is safe and clear. Then, pull the control handle towards you while stepping on the pedal. Stay focused and alert and make sure that you are operating in a safe manner at all times.
When it comes to turning corners, turn your steering knob in the direction you have to go while keeping your foot on the power pedal and your hand on the control handle. When turning right, the steering knob would move in a clockwise direction while moving forward. If you are turning left, your steering knob would go in a counter-clockwise direction.
If you have just used sit down units, the stand-up versions may take some getting used to. With some training and taking some time to know the machinery, you would be able to handle loads efficiently and quickly in little time.